CrossLink
CrossLink arrives pre-programmed with the thermal profile required for each validated material. The oversized interior chamber can accommodate two full Stratasys Origin One builds.
SKUÂ 750210-1001
Category
WRAP
Selected P3/DLP materials can achieve superior mechanical properties. For these mechanical properties to be achieved, a thermal post-cure is required to properly crosslink polymer chains. CrossLink was designed to ensure that these bonds have been achieved, and thorough validation has been performed by key material manufacturers.
CrossLink – Accurate Thermal Curing OvenÂ
Includes:
– Pre-Programmed for Stratasys Origin Validated Materials
– 1-Year Parts Warranty & Email Support
| Performance | |
|---|---|
| Convection Mode | Forced Convection |
| Temperature Range | 5°C – 300°C (41°F – 572°F) |
| Temperature Fluctuation | ±1 in the range of 50 – 300°C |
| Temperature Accuracy | 0.1°C (32.18°F) |
| Temperature Uniformity | 2% |
| Structure | |
| Shell | Cold-rolled steel plate with electrostatic spray surface |
| Insulation Layer | High-quality rock wool board |
| Heater | Stainless steel electric heating tube |
| Power | 1.2W |
| Exhaust Hole | φ30 mm behind (with test hole function) 50 mm test hole on the side |
| Controller | |
| Control System | Touch screen; programmable, pre-programmed |
| Temperature Control Method | Intelligent PID |
| Temperature Display Method |
Measured Temperature: Top row of LED display Set Temperature: On LED numeric display Set Time: Displayed on the instrument |
| Timer | 0 – 99 hrs. or 0 – 9999 mins. |
| Operating Function | Ambient Temperature: 10 – 30°C (50 – 86°F) Humidity: <70% |
| Sensor | pt100; Instrument has an over-temperature alarm function |
| Specifications | |
| Internal Dimensions | 420 x 450 x 350 mm (16.5 x 17.7 x 13.8 in.) |
| External Dimensions | 600 x 790 x 545 mm (23.6 x 31.1 x 21.5 in.) |
| Interior Volume | 70L |
| Number of Shelves | 2 |
| Minimum Spacing Between Shelves | 48 mm (1.9 in.) |
| Load-Bearing Capacity of Shelves | 15 kg (30 lbs.) |
| Power | AC110V, 11A, 50 – 60 Hz |
| Weight | 50 kg (110 lbs.) |
How It Works
The Onulis workflow is both comprehensive and simple to use. Visit our P3/DLP Workflow Guide to see the recommended post-processing instructions for your specific material.
Step 1
CleanPoint
Part Cleaning
Fully automatic two-tank washing station.
Step 3
CrossLink
Thermal Part Curing
Accurate, pre-programmed thermal curing for Origin materials.
Need Help?
If you’re having trouble with your CrossLink, submit a support request and one of our experts will get in touch. You can also explore the user guides below.
